Microphone onair switch for 4 mics + IP

6.290,00 kr. ex moms

Forventet leveringstid: ca. 2 uger

MPN: MOSQUATROIP

Varenummer (SKU): TVMOSQUATROIP Kategorier: , ,

Beskrivelse

Suitable for signalling 4 on-air lamps for microphones. e.g. YELLOWTEC MIKA ON-AIR MIC ARM.

There are 4 methods to work with MOS Quatro IP:

  • TCP COMMANDS / STRINGS

  • TELOS AXIA X-NODE / LIVEWIRE DRIVER

  • TELOS AXIA QOR/IQ/IQX

  • DHD LOGIC

ON-AIR: red

OFF-AIR: white

STATUS LED INDICATOR
The LED will light up when the 12VDC power supply is present.

12VDC POWER INPUT
Ratings: 12VDC (9~18 volt) at 250mA. The polarity is not important
Power supply is included, options: 115V/USA – 230V/AUS – 230V/EUR – 230V/UK

4x MIC OUT (TO STUDIO)
Microphone output; connect to your equipment with standard MIC cable
(XLR 3pin)
– PIN1: Ground (Shield)
– PIN2: Positive (Red)
– PIN3: Negative (Blue)

4x MIC ONAIR ARM
Connect to the MIC ON-AIR ARM with standard MIC cable (XLR 5pin)
– PIN1: Ground (Shield)
– PIN2: Positive (Red)
– PIN3: Negative (Blue)
– PIN4: LED (Yellow)
– PIN5: LED (Black)

SPECIFICATIONS

4x LED INDICATOR
4x MIC OUT (TO STUDIO)
4x MIC ON-AIR ARM
logo large white.png
There are 4 methods to work with MOS Quatro IP:
  • TCP COMMANDS / STRINGS

  • TELOS AXIA X-NODE / LIVEWIRE DRIVER

  • TELOS AXIA QOR/IQ/IQX

  • DHD LOGIC

12VDC POWER INPUT

Brand

AeroAudio

Læs mere om AeroAudio

AeroAudio

AeroAudio designer og fremstiller broadcast- & radioløsninger af høj kvalitet. Målet er at designe og skabe de mest effektive og brugervenlige produkter, der løser problemet med 'hvordan forbinder jeg', 'hvordan styrer jeg' eller 'hvorfor går det i stykker igen', som teknikere og brugere står over for i hverdagen . AeroAudio har produkter som forstærkere, switchere og bluetooth-sendere til mikrofoner og høretelefoner.